Full Glass Carbon fiber tube 1000mm and 10*8mm with The glass fiber
- The Carbon Fiber tubes are glass fiber widely used for industries
R/C booms, telescopic poles, walking sticks, DSLR rigs etc.
- N.W.:44.86g/pc ,Working Temperature: 80 Celsius Degree or Below
- The 10mm OD×8mm ID×1000mm Length tube is mainly for R/C
- Round Carbon Fiber tubes are Carbon Fiber Epoxy Prepreg Fabric
table-rolled outside a mandrel of certain diameter and thermoset at
temperature 125 Celsius Degree.
- The mandrel, which is also referred as mould, is then demolded and
ground on the Centerless ground machine to ensure the outer
- The Carbon Fiber tubes are cut by diamond blade.
3k The glass fiber
The Carbon Fiber tubes aremade of organic fibre by carbonization and graphitization treatment
microcrystallineink materials.The micro structure of carbon
fiberArtificial graphite,Is disorderly layer
of graphite structure.
The Carbon Fiber tubes are a kind of excellent mechanical properties of new materials,
It's less than steel the A quarter, the tensile strength of carbon
fiber resin composite materials are
generally in 3500 mpa Above, is a steel 7 ~ 9 Times, tensile
elastic modulus Amount for 230 ~ 430 gpa
Also higher than that of steel.so CFRP Than the strength of the
strength of the material with the ratio of
the density can be achieved 2000 mpa/(g/cm3) Above, and A3 Than the
strength of the steel is only
59 mpa/(g/cm3) Left and right sides, the modulus of than is higher
greater than the strength of the component the less weight, higher
than the modulus, the greater the,
stiffness of the artifacts, in this sense has been predicted The
broad application prospect of carbon fiber
in engineering. Through a variety of new composite materials(Such
as polymer composite material, metal
Matrix composites,Ceramic matrix composites)The outstanding
performance,Many people expect,
The human on the material used is moving from an era of iron and
steel Into an era of composite materials
are widely used.
a. Q : Can I have a sample order?
b: Yes,we welcome sample order to test and check quality.Mixed
samples are acceptable.
a. Q : What is the lead time?
b: Sample needs 1-3 days,mass production needs 10-15 days,also
according to the order volume.
1. Customers' Pursuits for Change, Lijin's Motivation for Grow.
2. The main materials we use are all high level in the domestic.
1. Normally, the parcel will be shipped out within 3-5 working days
after payment is received.
2. And we also make the lower commercial invoice for custom
clearing to avoid the big tax according to
most of our customers’ requirement.