100% Full carbon fiber tube 25mmx23mmx1000mm, mould pressing carbon
Distance: people with distance on the surface of the product is
300-350 - mm.
Time: surface volume and other no more than 8 s
Check the total time per piece not more than 30 s (except the
Lighting: the 100 w cool white fluorescent, cell surface is 500-550
- mm (500-550 lux).
The quality requirements
The wall clean, bright
logo are clear and complete bubble tub without
impurities such as welding slag particles.
The three major advantages
Small thermal expansion coefficient, the vast majority of the
thermal expansion coefficient of carbon fiber
itself, indoor negative (0.5 ~ 1.6) x 10-6 / K to zero during 200 ~
400 ℃, in less than 10-1000 ℃ for
1.5 x 6 / K.Composite material made of it nature is stable,
expansion coefficient can be used as a
standard measure.Outstanding damping with excellent through sonar
using this two characteristics can
be used as structure materials, Carbon Fiber Tube such as submarine
sonar dome, etc.
Good abrasion resistance, carbon fiber and metal grinding, rarely
wear, made from carbon fiber to replace
asbestos advanced friction materials, has been as planes and cars
brake pad material.
Carbon fiber for high temperature performance is good, the
performance is very stable under 400 ℃,
even at 1000 ℃ is still no too big change.Composite material high
temperature resistant performance
mainly depends on the heat resistance of matrix, and the resin
matrix composite materials Feeding its
long-term heat resistant up to 300 ℃ or so, only ceramic base,
carbon and metal based composite
material high temperature resistant performance can be matched with
carbon fiber itself.So the carbon
fiber composite material as the high temperature resistant material
widely used in aerospace industry.
High X-ray transmission rate: the characteristic has been applied
in the medical equipment.